Date: 04/08/2010 @ 4:47 PM
Hybrid: H28
Temp.: 0 C
Operator: HM & VRR

Summary:
   >>> right before this test, talk_com4+ is modify by rick to make PIXSLIN shorter.
   1) DC per-pixel tests
   2) ADC integral linearity
   3) Normal mode threshold
   4) CP mode pixel transfer function/noise

Procedure:

   1) Install hybrid to position A and ensure 1x probe attached at position A
      "scope out". Apply black cover to block light. (Leave positions B, C, and D empty.)
   1.2) Record hybrid serial number ________. H28
   1.5) Create a folder within the Win32For directory name "H###" to hold the
        test data.
   2) Start Win32For by double clicking desktop icon. Load "talk" program
      using "fload talk-com4+". Prepare to boot MISC by typing "talkk"
   2.5) Make sure meters are on at "2A" setting.
   3) Apply power by turning on power strip switch.
   4) Record currents:

      8V ________ 12V ________ -12V ________ 1.5D ________ 1.8D ________ 3.3V _____
         0.028       0.003           0.011         0.025        0.000        0.032
	5) Boot MISC by typing a "carriage return" (enter) to execute previously typed "talkk"
   6) Open a log file using ^G and specify the filename "pixeldc.txt" in
      the data folder "H###".
   7) Load files md00.txt through md07.txt into MISC using ^A command. Files are in
      directory C:\cygwin\home\miyasaka\work\misc\asictest1-26-10\md  
   8) On the MISC execute "PIXELDC". Wait for "DONE", then close the log file with ^G.
   9) Exit the talkk program by typing "esc".
   9.5) Record currents:

      8V ________ 12V ________ -12V ________ 1.5D ________ 1.8D ________ 3.3V _____
         0.021        0.003         0.011         0.026         0.010         0.038

  10) In Win32For window execute "intlin".
   11) After "intlin" finishes, execute "talk" and open a log file using ^G. Name it
       "intlin.txt" in the data folder "H###".
	12) On MISC execute "300 5 MEANS@", then close log file.
   12.5) Need to change the value of "VPL2SEL"
	      at -15 C use "9 VPL2SEL ! CMD!"
		   at 0 C use "10 VPL2SEL ! CMD!"
		   at 40 C use "12 VPL2SEL ! CMD!"
   13) Exit "talk" using "esc".In Win32For window execute "ndisctest". Specify the log file to be "disc.txt" in
       the data folder "H###". Wait for "DONE".

   14) In Win32For window execute "talk".
	15) On MISC execute "GO", then "SWCNTS." a few times to verify event processing.
	17) On MISC execute "ALLON ECMD!" and "SWCNTS."
	17.5) If output of "SWCNTS" NEV and NTPTRIG are not similar (~190) then raise the
	      threshold.  
   18) On MISC execute "EVOFF CPMODE EVON" and "SWCNTS."
	18.5) On MISC execute " 1 SCOPSEL ! ECMD! " to observe preamp output.
   19) From probe station test of this ASIC find the optimum value of 4VSEL and record ________44.
   20) On MISC set the variable 4VSEL to the optimum value using "### 4VSEL ! ECMD!".
	21) On MISC execute "EVOFF 0 0 XYSEL EVON" and view sawtooth on scope.
	22) On MISC execute "EVOFF 31 31 XYSEL EVON" and compare sawtooth to that for pixel 0,0.
   23) do "esc". In Win32For window execute "pixslin". Specify the binary file to be "pixslin.bin" in
       the data folder "H###". Wait for "DONE".